Clamp 2 mm TLS-Profi (100 pcs) TLS12020

Clamps for leveling TLS-Profi tiles - 2 mm. Using them you can get a standard 2 mm cross seam. - Do not break during installation and are easily knocked down with a rubber hammer. - Thin support 1.7 mm - less glue consumption. - Possibility of installation on the wall. Dimensions: The width of the wedge hole is 9 mm Clamp base thickness: 1.7 mm Calculation of the required quantity: - For complex layouts and uneven tiles, the number of clamps must be increased. Depending on the length, curvature and shape of the tile, you need to install clamps 5 cm from the edge of the tile and then approximately every 20 cm along the length of the tile (at the discretion of the master). - The required number of wedges is about a third of the number of clamps. You can also order wedges in the quantity required for the area that the master can lay in a day.